Black Myth Wukong System Requirements: Can Your PC Run It?

Published

On this page

Black Myth Wukong is a flagship Unreal Engine 5 action-RPG, and its Lumen lighting makes it heavier than its gorgeous art might suggest. Here’s what you need to run it, what you need for smooth 60+ play, and the optimizations that matter most.

Black Myth Wukong System Requirements: Can Your PC Run It?

Minimum system requirements

  • OS: Windows 10 64-bit
  • Processor: Intel Core i5-8400 or AMD Ryzen 5 1600
  • Memory: 16 GB RAM
  • Graphics: NVIDIA GeForce GTX 1060 6GB or AMD Radeon RX 580 8GB
  • DirectX: Version 12
  • Storage: 130 GB available space (SSD strongly recommended)

These specs target roughly 1080p at low settings with upscaling. Expect to run DLSS/FSR Quality and frame generation off.

  • OS: Windows 10/11 64-bit
  • Processor: Intel Core i7-9700 or AMD Ryzen 5 5500
  • Memory: 16 GB RAM (32 GB ideal)
  • Graphics: NVIDIA GeForce RTX 2060 or AMD Radeon RX 5700 XT
  • DirectX: Version 12
  • Storage: 130 GB on an SSD

This targets a solid 1080p–1440p experience at medium settings with Quality upscaling.

For smooth 60+ FPS at 1440p

If you want consistently high frames:

  • Processor: Intel Core i5-13600K / AMD Ryzen 7 7700X or better
  • Graphics: RTX 4070 / RX 7800 XT or better
  • Memory: 32 GB RAM with XMP/EXPO enabled
  • Storage: NVMe SSD
  • Use Quality upscaling, keep Full Ray Tracing off, and enable Frame Generation only above a 60 FPS base.

UE5’s Lumen is GPU-hungry, so the graphics card matters most for this title.

Performance optimization tips

If you meet the specs but still see drops:

  • Set Global Illumination and Reflections to Medium — the biggest single FPS settings.
  • Enable Quality upscaling for a large boost with minimal clarity loss.
  • Install on an NVMe SSD to reduce traversal hitching.
  • Update GPU drivers and let shaders finish compiling after each patch.
  • Consider disabling VBS for extra CPU headroom.
  • Consider undervolting your GPU to hold boost clocks longer in long sessions.

Timer resolution and input delay

For crisp dodges and parries, frame consistency and input latency matter. Download Tier1Timer to apply the optimal timer setting automatically, or read The Ultimate Guide to Timer Resolution for Gaming.

Even near minimum spec, Black Myth Wukong is playable with Quality upscaling and Medium GI. Hit the recommended tier with a strong GPU and 32 GB of RAM, and you’ll hold a smooth 60+ at 1440p.

Frequently asked questions

Can I run Black Myth Wukong on minimum specs?

Yes. Minimum specs are Windows 10 64-bit, i5-8400/Ryzen 5 1600, 16GB RAM, GTX 1060/RX 580, and 130GB on SSD. Target roughly 1080p low settings with DLSS/FSR Quality upscaling.

What GPU do I need for smooth 1440p gaming in Black Myth Wukong?

For consistent 60+ FPS at 1440p, get at least an RTX 4070 or RX 7800 XT. UE5's Lumen lighting is GPU-intensive, so the graphics card matters most for this title.

How much RAM do I need for Black Myth Wukong?

16GB is the minimum. 32GB is ideal, especially with XMP/EXPO enabled, for smoother performance and less CPU paging. Recommended systems already call for 32GB.

Should I install Black Myth Wukong on an SSD or HDD?

Always use an NVMe SSD. The game is 130GB and UE5's streaming benefits hugely from fast storage. HDDs cause serious traversal stutter and load hitches—don't use them.

What settings give the biggest FPS boost in Black Myth Wukong?

Lower Global Illumination and Reflections to Medium (largest single impact), enable Quality upscaling for a major FPS gain with minimal clarity loss, and turn off Full Ray Tracing. Use Frame Generation only above 60 FPS base.