Best World of Tanks Settings for FPS (Lower These First)
By Tier1Settings Published
On this page
The best World of Tanks settings for FPS: click Recommended, keep the Improved render, then lower antialiasing, texture quality, object quality, draw distance, and lighting and post-processing, in that order. If that isn’t enough, drop one preset, which Wargaming says can add 30 to 40% performance. Everything below comes from Wargaming’s own support article and graphics guide, checked on 20 November 2026.

Wargaming’s advice is to cut the expensive effects before touching the render mode: antialiasing, high-detail textures, lighting and post-processing cost far more than they add to what you can see in a fight, while switching the whole render mode throws away detail you’d keep by tuning those.
Step 1: Let the game recommend a preset
On first launch, or when you click Recommended in the Graphics settings, the game checks your CPU, GPU, RAM and video memory and picks one of six presets: Minimum, Low, Medium, High, Maximum or Ultra. Wargaming’s guide notes that Minimum and Low use the standard-resolution client and Medium and above use the high-resolution one.
Start there. If the frame rate is too low, don’t jump straight to Minimum. Lower the advanced settings in Step 2 first, and only drop a whole preset if that isn’t enough.
Step 2: Lower the settings that cost the most
Wargaming lists the graphics settings from most to least demanding. Lower them in this order:
| Order | Setting | What it does | Wargaming’s note |
|---|---|---|---|
| 1 | Antialiasing | Smooths jagged edges | Most demanding group; optional on Standard, tied to the preset on Improved |
| 2 | Texture quality | Surface detail | Maximum includes HD textures; costs video memory |
| 3 | Object quality (Object LOD) | Distance at which objects switch to lower detail | On Medium and below, tank tracks are drawn simplified |
| 4 | Draw distance | How far non-gameplay objects are drawn | Low values can hide targets behind scenery |
| 5 | Lighting and post-processing | Reflections, global illumination, god rays, ambient occlusion (HBAO), lens flare; vignette, film grain, motion blur | Lighting is expensive; post-processing is mostly cosmetic |
| 6 | Terrain and water | Ground detail, tessellation, water | Water-heavy maps (Fjords, Fisherman’s Bay, Glacier) cost more; tessellation is Improved-only |
| 7 | Vegetation | Grass amount and detail | Lower it for more FPS; grass transparency in sniper mode is separate |
| 8 | Effects | Explosions, fire, smoke, Havok debris | Turn off Havok destruction debris on a weak CPU |
For competitive play, post-processing and motion blur are the easiest cuts: they add film-style effects, not information. Keep draw distance and object quality higher if you snipe from long range.
The support article uses “Object LOD” where the graphics guide says “Objects Quality”. They refer to the same group. Setting names can shift between client updates, so match by description if your menu reads differently.
Step 3: Keep Improved render unless nothing else works
World of Tanks has two render modes, Standard and Improved. Improved supports the full set of effects; Standard drops some of them. Wargaming’s support article is explicit: if auto-detect suggested Improved, don’t switch to Standard to gain FPS, because you lose much more image quality than you would by lowering the Step 2 settings. Treat Standard as the last resort for very old hardware.
Step 4: Check your PC against the 2026 requirements
Wargaming raised the minimum and recommended specs with Update 2.3.1:
| Minimum | Recommended | |
|---|---|---|
| OS | 64-bit Windows 10 or 11 | 64-bit Windows 10 or 11 |
| CPU | Intel Core i5-3330 / AMD FX-6300 | Intel Core i3-9100F / AMD Ryzen 3 3100 |
| GPU | NVIDIA GTX 660 / AMD Radeon R9 270 | NVIDIA GTX 1650 / AMD Radeon RX 580 |
| RAM | 8 GB | 16 GB |
| Free disk space | 70 GB | 120 GB |
| Internet | 256 kbps | 1 Mbps or more (for voice chat) |
If your PC met the old minimum it will still launch, but Wargaming says it can no longer fully guarantee stability or performance below the new one. On an 8 GB system, close browsers and launchers before a session, and keep texture quality below Maximum.
Step 5: Drivers and a steady frame rate
Wargaming’s support pages point to updating the GPU driver and resetting driver settings when performance is off. If a driver update leaves things worse, do a clean install with DDU.
A tank game doesn’t need 300 FPS, but it does need steady frame times when you’re aiming. Cap the frame rate a little below what your PC holds in a busy fight (see the best FPS cap for low latency), and use an FPS overlay to check the 1% lows, not just the average. If FPS falls the longer you play, see why FPS drops after hours of gameplay.
Quick setup for most PCs
- Click Recommended, keep the render it picks.
- Antialiasing: one step down, or off on Standard.
- Texture quality: one step below Maximum if your GPU has little video memory (Maximum adds HD textures).
- Post-processing and motion blur: off.
- Vegetation and effects: Medium; Havok debris off on a weak CPU.
- Still short? Drop one preset (Wargaming: up to 30 to 40% faster).
For the other armoured-combat title we cover, see War Thunder’s DLSS and frame generation settings. For NVIDIA driver-level options, see the best NVIDIA Control Panel settings for gaming.
Sources
- Wargaming Player Support, “Graphics Options in Update 1.0” (wargaming.net/support, article 16379)
- World of Tanks, “Update 1.0: Graphics Settings Explained” (worldoftanks.eu)
- World of Tanks, “System Requirements” guide, Update 2.3.1 (worldoftanks.eu)
Frequently asked questions
What are the best World of Tanks settings for FPS?
Click Recommended in the Graphics settings to let the game pick a preset, then lower the options Wargaming names as the most demanding: antialiasing, texture quality, object quality (object LOD), draw distance, and lighting and post-processing. Keep the Improved render if the game recommended it, and drop one preset level (for example High to Medium) if you need more.
Should I use Standard or Improved graphics in World of Tanks?
Keep Improved if the auto-detect picked it. Wargaming's support article advises against switching from Improved to Standard to gain FPS, because Standard loses a lot of visual quality when lowering individual advanced settings recovers performance with less loss. Standard lacks some of the effects that Improved supports, such as tessellation and Havok debris.
How much FPS does a lower preset give in World of Tanks?
Wargaming's Update 1.0 graphics guide says dropping one preset, for example from High to Medium, can raise overall performance by 30 to 40%. That is the only figure Wargaming publishes; your gain depends on your CPU and GPU.
What are the World of Tanks system requirements in 2026?
Since Update 2.3.1 the minimum is 64-bit Windows 10 or 11, an Intel Core i5-3330 or AMD FX-6300, an NVIDIA GTX 660 or AMD Radeon R9 270, 8 GB of RAM and 70 GB free. The recommended spec is an Intel Core i3-9100F or AMD Ryzen 3 3100, a GTX 1650 or Radeon RX 580, 16 GB of RAM and 120 GB free.
Does lowering draw distance in World of Tanks hide enemies?
Draw distance only affects objects that don't matter to gameplay, but Wargaming warns that a low draw distance can still hide targets behind scenery you no longer see clearly. Lower it after antialiasing and textures, not first, if you play long-range roles.
Does World of Tanks support DLSS or FSR?
Wargaming's own settings guide and support article don't mention DLSS, FSR, XeSS or NVIDIA Reflex, so this guide doesn't recommend them. Use the in-game settings and a frame-rate cap instead.