Where Winds Meet DLSS 5, DLSS and Frame Generation Settings

On this page

As of 16 November 2026, the best Where Winds Meet DLSS setup is DLSS Super Resolution on Quality with NVIDIA Reflex on, and frame generation only once your base frame rate is smooth. RTX 50 Series owners also get DLSS 5 from 23 November. Every GeForce RTX card can use DLSS upscaling, RTX 40 cards add Frame Generation, and RTX 50 cards add Multi Frame Generation and DLSS 5. These are the facts NVIDIA and NetEase have published; we’ll update this page after DLSS 5 launches.

Where Winds Meet DLSS and frame generation settings

Where Winds Meet (Everstone Studio / NetEase Games) is a big open-world wuxia game. Its PC requirements on Steam list DirectX 12, a GTX 1060 6GB or RX 480 8GB at minimum, an RTX 2070 SUPER, RX 6700 XT or Arc A750 recommended, 32 GB of RAM recommended, and an SSD. Even recommended-spec PCs drop frames in dense towns, which is why upscaling matters here.

What each GeForce card gets in Where Winds Meet

FeatureWhat it doesWhich GPUs (per NVIDIA)
DLSS Super ResolutionRenders at a lower resolution and upscales it with AIAll GeForce RTX (20, 30, 40, 50 Series)
DLAASame AI image quality at native resolution, no upscalingAll GeForce RTX
NVIDIA ReflexCuts PC latency (NVIDIA claims up to 53% in this game)All GeForce cards, GTX included
DLSS Frame GenerationGenerates one extra frame for every rendered frameRTX 40 Series and RTX 50 Series
DLSS Multi Frame GenerationGenerates up to several frames per rendered frameRTX 50 Series
DLSS 5 (3D-Guided Neural Rendering)Adds AI-generated lighting and material detail, from 23 Nov 2026RTX 50 Series (desktop and laptop), RTX Spark, GeForce NOW Ultimate

NetEase added the DLSS 4 Multi Frame Generation option in its 28 November 2025 update, telling RTX 50 Series owners to enable it in settings. NVIDIA’s December 2025 launch post claims Multi Frame Generation can raise frame rates “by up to 3.9X at 4K” with maxed settings on an RTX 5090. Treat that as a vendor best case, not what a mid-range card will see.

Best DLSS settings by resolution

ResolutionDLSS Super Resolution modeNotes
1080pQuality, or DLAA if you have headroomBelow Quality, 1080p upscaling gets visibly soft
1440pQualityBalanced if busy towns still dip below your target
4KQuality or BalancedPerformance mode is fine on mid-range cards at 4K

Pick the mode first, then set your other graphics options. If you’re not sure which mode to use, our DLSS Quality vs Balanced vs Performance guide covers the trade-off.

Should you turn on frame generation?

Frame generation raises the frame rate you see, not the rate the game responds at. In Where Winds Meet that trade-off depends on what you’re doing:

  • Exploring, story and PvE: turn it on if your base frame rate is already around 60 FPS or higher and you have a high-refresh monitor. Motion looks clearly smoother.
  • PvP, Arena and Guild Wars: leave it off, or test it carefully. Timing dodges and counters depends on real frames, and generated frames add a small delay. See frame generation and input lag explained.
  • Low base frame rate (under ~45 FPS): lower settings or the DLSS mode first. Frame generation can’t fix a frame rate that’s already too low, and it makes the delay more noticeable.

Always keep NVIDIA Reflex on when frame generation is on. It offsets most of the extra latency. Our NVIDIA Reflex guide explains On vs On + Boost.

On RTX 50 cards, you can also set Dynamic Multi Frame Generation in the NVIDIA app (DLSS Override – Frame Generation Mode → Dynamic) so the multiplier follows your monitor’s refresh rate. NVIDIA notes Dynamic mode isn’t compatible with frame-rate limiters or V-Sync, so turn those off if you use it. The Multi Frame Generation explainer covers how the multipliers work.

DLSS 5 in Where Winds Meet (from 23 November)

NVIDIA’s 5 November and 11 November 2026 posts say DLSS 5 with 3D-Guided Neural Rendering comes to Where Winds Meet on 23 November 2026. Here’s what’s confirmed so far:

  • What it does: DLSS 5 uses the frame’s color and motion vectors to generate richer lighting and material detail with AI. It’s about image quality, not frame rate. NVIDIA says Everstone Studio and NetEase “maximized DLSS 5’s settings” for this game.
  • Who gets it: GeForce RTX 50 Series desktops and laptops, RTX Spark systems and GeForce NOW Ultimate. RTX 40 and older cards don’t.
  • How you’ll use it: NVIDIA describes DLSS 5 as a simple on/off toggle for players. It hasn’t published the exact menu name for Where Winds Meet yet. In Hogwarts Legacy the option is called “Neural Rendering”, so look for something similar.
  • Driver: NVIDIA’s Game Ready driver for Where Winds Meet is 621.24 WHQL (released alongside the 11 November post). Install it or newer before 23 November.

We’ll add the in-game option name and any performance cost once DLSS 5 is live.

AMD and Intel GPUs

NVIDIA’s DLSS features need a GeForce RTX card. Third-party guides say the game also offers AMD FSR and Intel XeSS, but NetEase hasn’t published a settings list we can check, and those guides disagree on details. Our advice: check the upscaler options in the game’s graphics settings, pick the Quality mode of whatever your card supports, and treat any frame-generation option as you would DLSS’s (only once your base frame rate is smooth). Our DLSS vs FSR vs XeSS comparison explains how they differ.

Before you blame upscaling: check the basics

  • Install on an SSD. NetEase recommends it in both requirement tiers. An HDD causes hitching in an open world this size.
  • Watch your RAM. 32 GB is the recommended spec. On 16 GB, close browsers and launchers before you play.
  • Update the driver. For NVIDIA cards, 621.24 is the Where Winds Meet Game Ready release.

If your frame rate drops over a long session, see why FPS drops after hours of gameplay. For the rest of your NVIDIA setup, see our NVIDIA App settings guide.

Sources: Where Winds Meet Steam store page (PC requirements); NetEase’s Steam announcements (28 Nov 2025 update notes); NVIDIA GeForce News (2 Dec 2025, 5 Nov 2026 and 11 Nov 2026 posts) and NVIDIA’s DLSS 4.5 Dynamic Multi Frame Generation post (31 Mar 2026).

Frequently asked questions

When does DLSS 5 come to Where Winds Meet?

NVIDIA says DLSS 5 with 3D-Guided Neural Rendering arrives in Where Winds Meet on 23 November 2026. It runs on GeForce RTX 50 Series desktop and laptop GPUs (plus RTX Spark systems and GeForce NOW Ultimate). RTX 40 and older cards don't get DLSS 5, but they keep DLSS Super Resolution and, on RTX 40, Frame Generation.

What are the best DLSS settings for Where Winds Meet?

Turn on DLSS Super Resolution at Quality for 1440p and 4K, and drop to Balanced only if your frame rate still dips in busy areas. If you already have plenty of frame rate, use DLAA instead for the sharpest image. Turn on NVIDIA Reflex, and only add frame generation once your base frame rate is smooth.

Which GPUs support frame generation in Where Winds Meet?

According to NVIDIA, DLSS Frame Generation works on GeForce RTX 40 Series cards, and DLSS Multi Frame Generation needs an RTX 50 Series card (NetEase added the Multi Frame Generation option in its 28 November 2025 update). Every GeForce RTX card can use DLSS Super Resolution, and every GeForce card can use Reflex.

Does Where Winds Meet support FSR?

Third-party guides say the game has AMD FSR and Intel XeSS options, but NetEase hasn't published a settings list we can confirm, and some of those guides contradict each other. On an AMD or Intel card, check the upscaler options in the game's graphics settings and pick the Quality mode of whatever your card supports.

Does frame generation add input lag in Where Winds Meet?

Yes, a little. Generated frames make motion look smoother, but the game still responds at your real frame rate, so frame generation feels best when you already have about 60 FPS or more. Keep NVIDIA Reflex on to offset most of the extra delay, and turn frame generation off if dodges and parries in PvP feel late.